American DJ DJ Equipment Saga User Manual

Saga™  
Introduction  
Unpacking:  
American DJ  
®
Thank you for purchasing the Saga™ by American DJ® Every Saga™  
has been thoroughly tested and has been shipped in perfect operating  
condition. Carefully check the shipping carton for damage that may  
have occurred during shipping. If the carton appears to be damaged,  
carefully inspect your unit for any damage and be sure all equip-  
ment necessary to operate the system has arrived intact. In the event  
damage has been found or parts are missing, please contact our toll  
free customer support number for further instructions. Please do not  
return the unit to your dealer without first contacting customer support.  
Customer Support:  
American DJ® provides a toll free customer support line, to provide set  
up help and to answer any question should you encounter problems  
during your set up or initial operation. You may also visit us on the web  
related issue please contact American DJ® Service Hours are Monday  
through Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.  
Voice:  
Fax:  
E-mail:  
(800) 322-6337  
(323) 582-2610  
Warning! To prevent or reduce the risk of electrical shock or fire, do  
not expose this unit to rain or moisture.  
Caution!
There are no user serviceable parts inside this unit. Do not  
attempt any repairs yourself, doing so will void your manufactures war-  
ranty. In the unlikely event your unit may require service please contact  
your nearest American DJ dealer.  
PLEASE do not discard the shipping carton in the trash. Please  
recycle when ever possible.  
User Instructions  
Safety Issues: This unit may blow a fuse if the maximum allotted  
load of 5 amps is reached. If the fuse needs replacement, always  
replace the fuse with same exact type that was remove, unless oth-  
erwise instructed by an authorized American DJ® service technician.  
Use of a different type fuse from that which is recommended may  
cause fire or electric shock and will void the manufactures warranty.  
American DJ®  
4295 Charter Street  
Los Angeles Ca. 90058  
Revised 02/02  
 
Saga™  
Fuse & Lamp Replacement  
Saga™  
Cleaning  
Fixture Cleaning:  
This fixture is fitted with halogen lamps which are  
highly susceptible to damage if improperly handled.  
Never touch the lamps with your bare fingers as  
the oil from your hands will shorten lamp life. Also,  
never move the fixture until the lamps have had  
ample time to cool. Remember, lamps are not cov-  
ered under warranty conditions.  
Due to fog residue, smoke, and dust cleaning the fixture should be  
carried out periodically to optimize light output.  
1. Use normal glass cleaner and a soft cloth to wipe down the outside  
casing every 20 days.  
2. Use a small brush and normal glass cleaner with a soft cloth to  
wipe down the inside casing every 30-60 days.  
3. Always be sure to dry all parts completely before plugging the  
unit back in.  
Caution:
Always replace with the exact same type lamp and fuse,  
unless otherwise specified by an authorized American DJ® technician.  
Replace with anything other than the specified part can damage your  
unit and will void your manufactures warranty.  
4. Frequent cleaning will extend lamp life and ensure fixture reliability.  
Cleaning frequency depends on the environment in which the fixture  
operates (I.e. smoke, fog residue, dust, dew). In heavy use we recom-  
mend cleaning on a monthly basis. Periodic cleaning will ensure  
longevity, and crisp beam output.  
Warning: If after you have replaced the lamp or fuse and you  
continue to blow either one, STOP using the unit. Contact customer  
support for further instructions, you may have to return the unit for  
servicing. Continuing to use the unit may cause serious damage.  
Saga™  
Trouble Shooting  
Fuse Replacement:  
Trouble Shooting:  
Disconnect the unit’s main power supply. Insert a standard flat head  
screw driver in to the fuse holder housing located on inner plate of the  
unit. Turn the screwdriver in counter-clockwise direction to unlock the  
fuse holder. Remove the fuse holder to expose the fuse. Remove the  
old fuse and discard it. Replace the fuse with the same type. Insert the  
fuse holder back into it’s housing and turn it in clockwise direction to  
lock the holder back in to place.  
Listed below are a few common problems and solutions you should try  
before contacting customer support.  
Unit internal wheels rotate with no light output from the unit;  
1. Be sure you have connected your unit into a matching wall outlet.  
2. Remove the lamp cover and be sure the lamp is seated in its  
socket properly. Occasionally lamps become loose during shipping  
be sure the lamp is push in to its socket all the way.  
3. Be sure the lamp is good.  
4. If the lamps was recently replaced, be sure the lamp probes are  
properly inserted in the socket assemble.  
Lamp Replacement:  
Caution! Never attempt to change the lamp while the fixture is plugged  
in and running. Always disconnect main power and allow the unit  
ample time to cool before attempting to replace the lamp.  
1. Be sure to follow all the proper handling procedures included  
with your new halogen lamp. Never touch the new lamp with  
your bare fingers.  
Unit does not rotate and lamp does not turn on;  
1. Be sure you have connected your unit into a matching wall outlet.  
2. Be sure the external fuse has not blown. The fuse is located on the  
side panel of the unit.  
3. Be sure the power cord is properly seated in the power outlet.  
4. Be sure your main power outlet has power.  
2. Remove the two thumb located on the face of the unit and remove  
the socket assembly cover to expose the lamp.  
3. Remove and replace the lamp.  
4. Reassemble in reverse order.  
 
Saga™  
ONE YEAR LIMITED WARRANTY  
Warranty  
A. American DJ® hereby warrants, to the original purchaser, American DJ® products to be  
free of manufacturing defects in material and workmanship for a period of one year (365  
days) from the date of purchase. This warranty shall be valid only if the product is purchased  
within the United States of America, including possessions and territories. It is the owner’s  
responsibility to establish the date and place of purchase by acceptable evidence, at the  
time service is sought.  
B. For warranty service, send the product only to the American DJ® factory. All shipping  
charges must be pre-paid. If the requested repairs or service (including parts replacement)  
are within the terms of this warranty, American DJ® will pay return shipping charges only  
to a designated point within the United States. If the entire instrument is sent, it must be  
shipped in its original package. No accessories should be shipped with the product. If any  
accessories are shipped with the product, American DJ® shall have no liability whatsoever  
for loss of or damage to any such accessories, nor for the safe return thereof.  
C. This warranty is void if the serial number has been altered or removed; if the product  
is modified in any manner which American DJ® concludes, after inspection, affects the reli-  
ability of the product; if the product has been repaired or serviced by anyone other than the  
American DJ® factory unless prior written authorization was issued to purchaser by Ameri-  
can DJ®; if the product is damaged because not properly maintained as set forth in the  
instruction manual.  
Please Note:
Specifications and improvements in the design  
of this unit and this manual are subject to change without any  
prior written notice.  
D. This is not a service contract, and this warranty does not include maintenance, cleaning  
or periodic check-up. During the period specified above, American DJ® will replace defec-  
tive parts at its expense, and will absorb all expenses for warranty service and repair labor  
by reason of defects in material or workmanship. The sole responsibility of American DJ®  
under this warranty shall be limited to the repair of the product, or replacement thereof,  
including parts, at the sole discretion of American DJ®. All products covered by this warranty  
were manufactured after January 1, 1990, and bear identifying marks to that effect.  
E. American DJ® reserves the right to make changes in design and/or improvements upon  
its products without any obligation to include these changes in any products theretofore  
manufactured.  
F. No warranty, whether expressed or implied, is given or made with respect to any acces-  
sory supplied with products described above. Except to the extent prohibited by applicable  
law, all implied warranties made by American DJ® in connection with this product, including  
warranties of merchantability or fitness, are limited in duration to the warranty period set  
forth above. And no warranties, whether expressed or implied, including warranties of mer-  
chantability or fitness, shall apply to this product after said period has expired. The con-  
sumer’s and or Dealer’s sole remedy shall be such repair or replacement as is expressly  
provided above; and under no circumstances shall American DJ® be liable for any loss or  
damage, direct or consequential, arising out of the use of, or inability to use, this product.  
G. This warranty is the only written warranty applicable to American DJ® Products and  
supersedes all prior warranties and written descriptions of warranty terms and conditions  
heretofore published.  
©American DJ®  
American DJ® Group of Companies World Headquarters:  
4295 Charter Street Los Angeles, CA 90058 USA  
Tel: 323-582-2650 / Fax: 323-582-2610  
H. Lamps are not covered under this or any other warranty either written or implied.  
 

3Com Power Supply 3644A User Manual
3Com Switch 3C17500 User Manual
Abocom Switch XP3241 User Manual
ADTX Boat AE1020 User Manual
AEG Cooktop 231GR M RU 949600674 User Manual
Air King Electric Heater 3DZR7 User Manual
Air King Fan 4TM61C User Manual
Air King Fan 9236C User Manual
Alliance Laundry Systems Washer 120 Pound Capacity User Manual
BC Speakers Speaker 12HPL64 User Manual