Addonics Technologies Computer Drive ZSNA256EU User Manual

T E C H N O L O G I E S  
User Guide  
Cipher Z-Drive Cartridge System  
(ZSNAES256 / ZSNA256EU)  
v3.1.11  
Technical Support  
If you need any assistance to get your unit functioning properly, please have your  
product information ready and contact Addonics Technical Support at:  
Hours: 8:30 am - 6:00 pm PST  
Phone: 408-453-6212  
 
Back  
Fan  
Switch  
CipherChain  
CipherChain  
Power Connector  
Cipher  
eSATA  
(to host)  
PWR  
HDD  
RESET  
eSATA Port  
Power LED  
HDD LED  
CipherChain  
Cipher  
eSATA  
(to host)  
PWR  
HDD  
RESET  
Cipher Keyhole  
Reset Switch  
How to operate the Cipher Z-Drive Cartridge System:  
Note: Hot swapping refers to the ability to plug and unplug the component without  
rebooting.  
1. Insert the AES 256-bit cipher key into the cipher keyhole on the Cipher Z-Drive  
Cartridge System.  
2. Power on the device.  
3. Observe that the green Power LED should light up. If it does not, re-insert the  
cipher key and re-power the device or reset the Cipher Z-Drive Cartridge System.  
4. For new drive, go to the operating system’s management utility to partition, format  
and mount the encrypted drive.  
Note: You may remove the cipher key from the Cipher Z-Drive Cartridge System once  
it is powered on. All the files being transferred into the drive are still encrypted even if  
the cipher key is removed. Always keep a spare master key in a safe place.  
 
Technical Support (M-F 8:30am - 6:00pm PST)  
Phone: 408-453-6212  
Reset switch  
The RESET button enables the adding and removing of hard drives without  
rebooting the enclosure. Following are examples of such an applications:  
a. When the cipher key is removed from the Cipher Z-Drive Cartridge System,  
pressing the reset switch will clear the key code and remove the drive icon. This  
is good for security when the Cipher Z-Drive Cartridge System is left unattended.  
b. Likewise when the Cipher Z-Drive Cartridge System is connected and  
powered on with a cipher key, pressing the RESET button will initialize the drive.  
Note that if the hard drive is not encrypted or if the cipher key does not match with  
what is on the encrypted hard drive, it will show up as an unallocated drive under  
the drive management screen and no drive icon will show up on the My Computer  
folder. It’s very important to make sure that the correct cipher key is used on the  
hard drive. Proceeding to initialize the hard drive will erase all the data  
beyond any possibility of recovery.  
Green Power LED  
In order to power on the Cipher Z-Drive Cartridge System, the cipher key must be  
inserted prior to powering or resetting the Cipher Z-Drive Cartridge System. If the  
power LED does not light up, the system will not detect the hard drive connected  
to the Cipher Z-Drive Cartridge System.  
Yellow Power LED  
Lights up when there is drive activity.  
CONTACT US  
Phone:  
Fax:  
408-573-8580  
408-573-8588  
Email:  
 

Abocom Network Card HP2000 User Manual
Acer Laptop m3400g User Manual
Addonics Technologies Blu ray Player ZBW 10LS2EU User Manual
Agilent Technologies Saw 16193A User Manual
Altinex Network Card DA2000TM User Manual
Alto Shaam Food Warmer ED2 48 P User Manual
Apple Network Card Network Setup User Manual
ATI Technologies Tiller 365 User Manual
Atlona Marine GPS System AT HD620 User Manual
Baldor Remote Starter MN894 User Manual